SpDrS60 Panel

From SignalWiki
Jump to: navigation, search

Contents | FAQ | Manual | General Tips and Tricks | Change Log | Multiplayer Manual | Line Operations Manual | Voice Communications | Change Log | Developers pages

Flag de.png Deutsch   Flag nl.png Nederlands


The panel

The Sp Dr S 60 Panel

The panel consists of small tiles which schematically represent the area of responsibility. Behind these small tiles are signal lights that change to indicate various states. Tracks, signals, switches are all represented by different colours of light bulbs being on or off.

These lights are not infallible and do burn out, so remember that the panel can be wrong.

Buttons

Various types of buttons are used:

  • black (1) : Used for manually throwing switches, for instance. The black buttons are seldom used. You will find these for example for switches.
  • grey (2) : Used for setting shunt routes.
  • grey with a red dot (3) : used for setting train routes.
  • grey with yellow dot : used for specific operation related to Level Crossings.
  • brown with white dot : these buttons are available on some dispatching panels instead of black buttons, in case the respective switch or track is equipped with axle counters.

Buttons may only be pressed, and cannot be pulled or turned as is the case with other dispatching panels.

Track sections

Ordinary track is represented as black paths with a light. The colour indicates various states of the track. The default state of track is dark. When a route has been set over the track, the light is white. As soon as a train occupies a section of track, the corresponding track tiles light up red.

A section of track may be represented by one track tile, or many. Whenever a track changes state, all corresponding track tiles change together.

A track, which is not equipped with a Track circuit system, is displayed on the panel with as broken black line. For these track, the dispatcher must note down whether the track is occupied by a train or not. A Notepad can be of great help here!

There are some things to remember about tracks:

  • there is no indication about what type of rollingstock is currently occupying a track
  • there is no indication about how many cars, or how many distinct consists there are on a track
  • the track light could be broken

Switches, Crossings and Derailers

There will be a switch or a crossing at the points where two tracks come together. The article Switches and Crossings explains the different forms in which those can appear, the way they are operated and the associated indicator lights. Within the signal box, the derailers are treated like switches.

Signals

There are a variety of signals on the panel. Almost always, signals are located on a track. Depending on there type signals can be grouped into shunt signals, distant signals and main signals. Additionally, the main signals are grouped into block-, entrance- and exit signals. All details on the various signals and their operation can be found in the article about Signals.

Level Crossings

In some signal boxes (like the one shown above) level crossings can be operated. These are shown on the panel by a broad dark gray line (the road) that crosses one or several tracks. The controls and indicators may vary, depending on the technical implementation of the level crossing.

Train Number Indicators

One of the first uses of train number indicators in Germany was in Braunschweig. The indicators are tremendously useful for showing where trains are located.

There are limitations, however. Not every main signal has an train number indicator. The numbers jump to the next indicator when a signal drops to “stop”.

This means:

  • If you revoke a route without putting the signal to “stop” the number gets transported to the next box as an error number of the form Fxxxxx where xxxxx is an incremented number. Use the HaGT button to first put the signal to stop before revoking.
  • Setting a shunt route from a track with an indicator to a signal without an indicator, the number does not get transported. The system does not know what to do with the number!
  • If you set a train route to a subsidiary signal, the train number is not transported. The system cannot see where the train will go behind the signal.

There are limitations here particularly during shunting. During shunt movements frequently use tracks that do not have train number indicators. Thus, the number can "jump" nowhere and will stay where it was. The number must then be deleted manually. Conversely, if a new train is assembled, the train number must be entered manually into the Train Number Indicator for the specififed track. The ZNP801 is used to delete or enter train numbers.

The last digit of a train display in a so-called "Vormeldefenster" always blinks. This Vormeldefenster (Train announcement) is marked with a "V" before the number of the identifier. The train number announced here means that this is the first train being sent by the neighbouring dispatcher.

Panel Magnets

Sometimes it is necessary to place reminders directly on the panel to indicate various things worth remembering. A good example is indicating where engineering work is occurring or where wrong line working is active.

The solution is panel magnets (4). These are magnetic labels that can be placed anywhere on the panel.

Spdrs60 panel magnets.png


To place a magnet, first open your “magnet bin” by pressing the "magnet bin" icon at the top left of the main panel window.

Spdrs60 panel magnets show.png

If it is not visible, navigate to Panel > Magnets to toggle the visibility of the bin.

Mouse over the magnets in the magnet bin to get a description of when to use each one.

Choose a magnet by clicking on it. Your cursor will change to look like the magnet. Click anywhere on the panel to place the magnet. If you placed it incorrectly, or wish to move it, simply click and drag the magnet.

To remove a magnet completely, zoom out, and drag the magnet off the panel into the flat grey space beyond the tile grid.

When you are done placing magnets, you may press the button to hide the magnet bit once more (see icon below).

Spdrs60 panel magnets hide.png

If you want to hide the arrows completely, use the Panel > Magnets menu option.

Magnet types

  • inline There is one special magnet that initially looks completely black. When you place it, however, you’ll be prompted to enter a short amount of text. This can be any text, as long as it is fairly short – there’s not a lot of room to write on the magnets. If you ever want to change the text or the color of this type of magnet, right‐click on it to get the text window again.
  • inline OHLE earthed/switched off
  • inline Track in possession (Gesperrtes Gleis)
  • inline Wrong Line Working Active (Befahren des linken (falschen) Gleises)
  • inline Section Clear Confirmation Required (Räumungsprüfung)
  • inline Unexpected Track Occupation (Abschnittsprüfung)
  • inline Maintenance Vehicle (Kleinwagenfahrt)
  • inline Out-Of-Gauge Train (Lademassüberschreitender Zug)
  • inline Do not run against sense of traffic (Nicht Links Fahren)
  • inline Engineering Works (Arbeiten)
  • inline Railway Crossing Defect (Bahnübergang)

Collars

In some cases, it is necessary to prevent buttons from being pressed entirely. A good example of this occurs when there is engineering work being done on a track. In addition to magnets being placed, it’s also a good idea to place collars over the buttons. These look like plastic caps and come in two colours:

  • red
  • glass

The red ones are used when we want to be very explicit about not pressing a particular button. To place a red collar, press F5. The cursor will change to a red circle. Then, press the panel button or the group button to which you want to apply the collar. To remove the collar, press F6, followed by the collar you wish to remove.

Placing and removing glass coloured collars is done the exact same way, using F7 and F8 respectively.

A button with a collar cannot be pressed, even accidentally. If you need to press the button, you must first remove the collar, press the button, and then replace the collar. These extra steps prevent you to make mistakes and are good as a reminder!

Input Feedback

When clicking buttons on the panel, you will notice coloured rings surrounding both buttons you have pressed, and some you have not. These are used to give you various types of feedback.

  • inline An active button that you have pressed, likely one of several buttons needed for a particular combination. When the fuchsia rings persist (they stay visible for more than a second or two) it is an indication that the button combination is not recognised.
  • inline You have pressed a signal button, the interlocking system is suggesting possible valid routes (the ring being around an end button or end signal. Pink does not 'guarantee' the route will be successful, but a quick check of the system indicates it is 'likely' to be successful.
  • inline Same as light pink, except the route is 'not' expected to be settable. The interlocking system is telling you that while the route does exist, something would likely prevent setting the route. When setting a route, for example, a yellow ring around and end button/end signal might indicate a missing piece of flanking protection.
  • inline Input was successfully received. This does not mean that the action was successful! It only means that the command was a valid one. When setting a route, for example, green indicates that the command was received for setting, but for many reasons, a route might not be fully set.
  • inline The combination of buttons is correct/recognised, but the command could not be completed.

Magnifier

A Magnifier function is available to have a instant closer look on the panel tiles.

Magnifier

The following options are available:

  • Degree of magnification (from 1-3 times)
  • Window type (changes each click)
  • Size of the zoom range


Size of the zoom range The magnifier can display 1, 2 or 9 tiles. The Train Number windows is always shown as "2" tiles even when "1" is selected.

Window type

  • inline Magnifier follows the mouse (orange window)
  • inline Magnifier in a separate window in the the main window (MDI window)
  • inline Magnifier in a separate window outside the main window (separate window)

Tile Observer

The dispatching panels are often physically large and occupy a lot of screen area. To help set common routes or view stacks of train number indicators, two windows are available: the Tile Observer window and the Freeform Tile Observer window. These windows can be opened using the View menu.

Read more about this feature on the page Tile Observer.

Contents | Sp Dr S 60 | FAQ | Manual | General Tips and Tricks | Multiplayer Manual | Line Operations Manual | Voice Communications | Change Log | Developers pages